Descriptions: LPG series high-speed centrifugel atomizing drier is a special equipment and is suitable for drying emulsion, suspending liquid, liquor and so on . Particularly it has unique for drying polyimers and resins: dyestuff and pigment; ceramics, glass; derust agent; pesticide; carbohydrate, dariry products; detergent and surfactant; fertilizer, organic compound and so on.
Principle: Air is turned into hot air filter and enters into hot air distributor at the top of dry chamber and then enters into dry chamber and rotates in the state of helix. At the same time liquid of raw material is sent to centrifugal atomizer at the top of dry chamber. Pumped by pump through filter. In which liquid of raw material atomizers small drops. Air and liquid of raw material flow and contact each other fully. The moisture vaporize rapidly. Liquid of raw material is dried into finished product in a short time. The finished product is discharged through cyclone separator at the bottom of drier. The wasted air is exhausted through fan.
Features: Its dry speed is very quick. In genral, it needs 5-15 seconds. It has feature of momentary dry. Because raw material can be dried momentarily. Especially . it is suitable for drying thermal sensitive raw materials. It can maintain color, smell and smell of raw materials. Its operation is stable and simple, Its regulation and control is very convenient. It is easy to realize continuous operation. The distribution, fluidity and solubility of product are good.

|
item\parameter |
5 |
25 |
50 |
150 |
200-2000 |
|
intel temperature(℃) |
140-350automatic |
|
outel temperature(℃) |
80-90 |
|
max.evaporated amount of moisture |
5 |
25 |
50 |
150 |
200-2000 |
|
drying form of centrifugal nozzle |
compressed air |
mechanica drive |
|
revolution(r.p.m) |
25000 |
18000 |
18000 |
15000 |
8000-15000 |
|
diameter of atomizing disk(mm) |
50 |
120 |
120 |
150 |
180-240 |
|
heat source |
electricity |
steam + electricity |
steam+electricity,oil fuel, hot air furnace |
|
max.power of electric heater(kw) |
9 |
36 |
72 |
99 |
|
|
Overall eimensions (LWH)(m) |
1.8×0.93×2.2 |
3×2.7×4.26 |
3.5×3.5×4.8 |
5.5×4.7 |
affirm it in accordance with practical conditions |
|
recovery rate of dry powder(%) |
≥95 | Note: The evaporated amount of moisture is related to characteristics of raw material and inlet and outlet temperature of hot air. |