Drier
Granulator
Medicine Machinery
Grinder
Dust Removal Equipment
Heat System
  Home  |  Products
T200-800 Ethanol Recovery Tower
Descriptions:
The device adapts high effect ceramics wavefiller. The body of distillation tower is made of stainless steel. In this way it can prevent from the phenomenon of filler block caused iron and its life is prolonged. All parts that will contact ethanol in the device such as condenser, buffer tank, cooling snake pipe are made of stainless steel in order to guarantee that the finished product, ethanol, is not polluted. Model W still may use disassemble U type heating pope. When maintenance. it  can be removed out to the still. So it is very convenient to clean the outer wall of heating pipe and the inner wall of still.
In Model T,m the indirect heating still is omitted. The condenser adapts calandria heat exchanger. Of course the screw plate heat exchange and coil pipe cooler can also be provided as request. When adapt coil pope cooler, the buffer tank.

Application:
The device is suitable for removing dilute ethanol of pharmaceutical industry, foodstuff industry, light industry, chemical industry and so on. It is also suitable for distilling solvents such as methanol and so on. Using this device, about 30°of dilute can be distilled into 90-95°as request. If the finished product has higher requirement to alcohol content, the ratio of reflex should be increased. But the output will be decreased.

Constitutes of device:
Model ZT has two specifications, Each specification is equipped with distillation tower, still, condusator, buffer-tank, measurer of specific gravity.
Other auxiliary equipment and meters and instruments such as measure tank, storage tank, pmp, rotameter and temperature indicator should be prepared by customer. Our company can also provide through additional process or order instead of customer as request.

model
diameter of tower(mm)
productive capacity if raw material to be fed is 30%-40%
productive capacity if raw material to be fed is 60%-80%
90%
95%
90%
95%
T-200
Φ200
35
26
45
36
T-300
Φ300
80
61
100
80
T-400
Φ400
150
120
180
140
T-500
Φ500
230
185
275
220
T-600
Φ600
335
270
400
320
ZT-200
Φ200
95
60
110
80
ZT-300
Φ300
200
120
240
165

Concentration of raw materialto be fed in: 30%-80%
Concentration of raw material be fed in: 90%-95%
Ratio of reflex: R = 13(affirmed in accirdance with the concen tration of raw material to be fed in and taken out)
Concentration of ethanol in residual liquid to be discharged: Model t ≤1%
Productive capacity(kg/h): see the list of productive capacity.
Factory Address: Changzhou Hengshan Town                              Postcode: 213022                                Copyright Changzhou Changhong Drying Equipment Co., Ltd.
Tel:0519-88968008 88968018            Service:0519-88968028            Fax:0519-88968866            Support:(0)13706128429            Designed by Zhanghuan Internet
在线客服
呼叫中心