Feedback Form Of Customers For Model Selestion |
Please fill the form in detail so that our company can provide discreet recommended model: |
| |
|
|
|
|
1. Material Name:
Formula:
Value of PH:
|
|
|
| |
|
|
|
|
3. Other characteristics of the material:
Flammability
Explosive
Reunion of
Peculiar smell Other:
|
|
|
|
4. Evaporated media name:
Molecular formula:
PH value:
|
|
Evaporated medium boiling point:
℃ ;The need for recycling: Yes
, No
|
|
|
|
5. The initial moisture content of materials:
%; Which contains crystal water:
|
|
Required moisture content after drying:
%; Requires the remaining crystal water:
|
|
|
|
6. Initial temperature of the material:
℃; After the required drying temperature:
℃. Whether to adopt closed cooling material: Yes
, No
|
|
|
|
7. Dry material can withstand the maximum temperature:
℃;Best when drying temperature range:
℃ |
|
|
|
8. Material softening temperature:
℃; The melting point of materials:
℃ |
|
|
|
9. Material specific heat:
KJ/kg. ℃; Thermal conductivity of materials:
KJ/m2.h. ℃ |
|
|
|
10.True density of materials:
kg/m3,The packing density of the material:
kg/m3 |
|
|
|
11.Particle size distribution:
mm to
mm; Percentage content≥
%
|
|
One: the maximum size
mm; Percentage content≥
%
|
|
Minimum size:
mm; Percentage content≥
% |
|
|
|
12. After drying the finished size required requirements:
mm |
|
|
|
13. The viscosity of the material under the original state:
cp;
Heating is to reduce viscosity of the mouth: Yes
, No
|
|
|
|
14. The form of dry materials can damage: Can
Can not
|
|
|
|
15. Dried product output:
kg/h (Or wet material handling capacity:
kg/h) |
|
|
|
16. Drying requirements:
Continuous drying ,
Dry gap ,
Dynamic Drying ,
Static Drying , |
|
Hot air drying,
Vacuum drying,
Microwave drying, other:
|
|
|
|
17. Over the past method of drying materials or similar method of drying products:
|
|
Wish to use the dryer Model:
|
|
|
|
18. Inlet requirements:
Natural folk songs,
300 000 filter,
100 000 filter,
10000 filter, other:
|
|
|
|
19. User requirements for the material drying equipment:
Contacts at the stainless steel material,
Stainless steel,
Titanium, |
|
Aluminum,
Carbon steel,
Glass-lined,
PTFE, other:
|
|
|
|
20. To be used in stainless steel:
SUS304,
SUS321,
SUS316,
SUS316L,
SUS2235, |
|
Other:
|
|
|
|
21. Materials recovery requirements:≥
%;
Dust emission requirements of environmental protection:≤
mg/nm3;
|
|
Exhaust emission requirements of environmental protection:≤
mg/nm3;
Wastewater, the maximum allowable waste discharge requirements≤
mg/L |
|
|
|
22. Drying process using heat medium and heat: Hot water
℃ ; Steam
Mpa; HTF
℃； |
|
Electric heating
, Coal-fired hot air furnace
, Fuel stove
, Gas stove
, Other:
|
|
|
|
23. Heat medium and heat: Self
, Optional
, Supporting the procurement
, Other:
|
|
|
|
24. Cleaning of equipment and health requirements:
|
|
|
|
25. Equipment to:
, Altitude:
, Humidity:
, Maximum temperature:
,
|
|
Minimum temperature:
, Average annual temperature:
, Other:
|
|
|
|
26. Budget for the purchase of equipment investment (RMB):
Ten thousand yuan |
|
|
|
27. Other requirements:
|
| |
|
|
|
